Aluminum Die Casting

The High Pressure Aluminum Die Casting Process

In theory, the high-pressure aluminum die casting procedure is easy: Molten metal is injected into the mould, strengthens a few seconds later on and is then ejected as a casting. The mould gets treated with a lubricant to prevent having the casting adhere to the mould then closed for the next “shot”.

Aluminum Die Casting

In reality, this simple-sounding process is extremely unsteady. For instance, a nozzle meant to spray lubricant on the mould surface may loosen and spray over a larger area than designated – or might clog partly or completely, limiting the amount and location of the spray. Missing out on a sufficient layer of lubrication, castings might stick in the mould, crack throughout ejection then have to be discovered within the production batch and scrapped.Similarly, melt volume in the holding heating system at the die-casting maker can alter the melt volume dosing into the machine chamber. This in turn alters the metal fill pattern into the cavity by increasing turbulences and the quantities of air that are entrapped in the casting creating porosities. Or consider a fundamental variable: the temperature of the mould. In order to get rid of pre-solidification throughout cavity filling the mould needs to be brought to working temperature of approximately 400 ° F/ 200 ° C.

Nevertheless, the liquid melt injected into the mould heats it beyond this temperature, which, if left unaddressed, would impact the functional life of the mould. In an attempt to manage this variable, liquid cooling medium containing streaming water or oil is required through channels in the die steel. However, the mould itself changes throughout a production run; as it warms from space to production temperature level, it increases in size; parts that held the mould closed in an unheated state may no longer work properly or completely. Even the condition of the die-casting maker itself changes throughout a production week; adjustments made on a cold maker yield various scale readings when the machine reaches production temperature levels. Variations are present when unexpected breaks happen; the longer the maker stops, the more difficult it ends up being for the operator to equilibrate the temperature levels once again. Additionally, mould aging impacts casting results: the mould uses at various speeds in various locations, affected by melt circulation patterns, place of clamps, scale accumulation in cooling lines – all which require the operator to continuously strive to equilibrate the mould temperature level.

In short, the high-pressure aluminum die casting procedure is in constant flux – and the result is in the hands of the store floor individual.

Process Simulation

Aluminum Die Casting

Blaming just the shop flooring personnel for bad castings would be as easy as it is unjust. In the most cases, poor quality results not from the efforts of the flooring workers, but from far earlier in the engineering process: the production procedure may have been insufficiently established; the casting shape may have been poor developed. In either case, a good quality casting will never be achieved. This is where process simulation can be of the greatest help.

In the first stage of process planning, casting simulations can be performed, long prior to cutting die steel or the release of the final casting design. Using CAD files of the early casting design concepts in combination with theoretical procedure criteria, simulations directly indicate prospective problems. At this point of advancement, the casting design and manufacturing process can be changed easily, quickly and inexpensively. With experience, a trained aluminum die casting engineer using simulation tools can produce a procedure that yields great quality castings throughout the first die trials.

In the most cases this success is accomplished by designing a mould utilizing one set of possible procedure specifications just. Offered the volume of specifications possible in the casting procedure, and the variety of variation within those specifications, the number of possible interactions that the engineer could think about technique infinity – as would the time had to research study those possibilities.With limited time and resources – and having actually attained these great castings through single criterion simulation – the engineer may stop at this point, and turn his attention to another task, leaving shop flooring workers to deal with any additional production variations.

Get the information about aluminum die casting you are seeking now by visiting http://www.ecodiecasting.com.